○ 1660p Quad HD ○ GPS ingebouwd ○ 2,0 inch LCD scherm ○ 256gb support Read more
€100,99
○ 1660p Quad HD ○ GPS ingebouwd ○ 2,0 inch LCD scherm ○ 256gb support
The Viofo A119 has been updated and released as this super V3 version of the A119. It has great features such as a Sony Starvis night vision sensor and automatic parking mode. Furthermore, the ease of use has remained the same and the A119 V3 also comes with a GPS module.
The Viofo A119 V3 records highly detailed videos thanks to the Sony Starvis IMX335 image sensor. As a result, recordings are of very high quality, especially at night. The camera records in 2560*1600 30fps but can also be set lower, such as at 1920*1080p 60fps. The lens is a 7G 1.8 aperture lens.
The Viofo A119 V3 is equipped with automatic buffered parking mode motion detection or Time Lapse. In motion detection mode, the camera is on standby and starts buffering 15 seconds before and 30 seconds after a motion is detected. In Time Lapse, the camera continuously records a 1fps video that can later be played back (accelerated) as 30fps video. This way, evidence is always available if the car has been damaged while parked.
The automatic parking mode only works if the dashcam is used with the Viofo Continuous power 3-wire kit (optional accessory). If connected, the camera will automatically switch to parking mode when the car ignition is turned off and switch to normal recording when the car is started.
The Viofo A119 V3 comes with a cradle with built-in GPS module. The GPS allows the current speed to be displayed in the image. This can be decisive as evidence in an incident. Moreover, the GPS memorises the location of the places filmed with the dashcam. Via the software on the PC, the route covered can therefore be viewed.
The optional CPL filter ensures optimum protection and image quality under sunny conditions. The CPL filter works for the dashcam like Polaroid sunglasses for the eyes. Harmful UV rays are filtered out and annoying reflections are eliminated. This improves the image quality and durability of the camera.
The Viofo A119 V3 is equipped with a super capacitor battery. This battery ensures that the camera can properly shut itself down after power is lost. Super capacitor batteries are specially developed for use in dashcams because they are more durable than regular Polymer Li-ion batteries and are also more resistant to high and low temperatures.
The Viofo A119 V3 is a very sleek and compactly designed dashcam. It fits easily behind the car's interior mirror. As it is barely noticeable, it does not hinder the driver and also reduces the risk of theft.
This Viofo A119 V3 dashcam has a 2.0-inch LCD screen. The screen displays live images and allows easy menu control. If desired, the built-in screensaver automatically turns off the LCD screen after a set number of minutes so it does not interfere with the driver.
The Viofo A119 V3 has a holder that attaches to the windscreen with a sticker. The dashcam can be easily removed from this holder. The sturdy attachment prevents the dashcam from falling off the windscreen and also reduces image vibrations.
With its 1.8 aperture and 6G lens, it captures a lot of light, ensuring very good image quality both during the day and in the dark.
HDR (High Dynamic Range) technology enables the camera to generate sharp images at very high and very low light intensities. As a result, the camera captures razor-sharp images in bright daytime and low light at night.
The Viofo A119 V3 is equipped with WDR (Wide Dynamic Range) hardware. This allows the dashcam to automatically adjust the light intensity depending on the environment. The WDR thus guarantees the best image quality under varying conditions.
The Viofo A119 V3 dashcam starts filming automatically when the car is started. So you no longer need to look at it while it is hanging in the car. The prerequisite for this is that it is connected to the power supply in the car.
With its built-in G-sensor, the Viofo A119 V3 dashcam notices when you've been in an accident. Upon impact, images are automatically saved securely so they are not lost. They can no longer be overwritten or deleted via the dashcam.
The AV output allows the dashcam image to be displayed on an external monitor, such as a built-in car navigation system. An AV cable is required to transfer the images.
The built-in microphone in this dashcam also records sound in and around the car. The microphone can be switched off if required
The Viofo A119 V3 supports MicroSD cards up to 256gb. This is enough for around 50 hours of FullHD video.
| General | |
|---|---|
 Brand |
Viofo
|
 Price |
€100,99
|
 Review |
|
 Warranty |
|
 EAN barcode |
6972147070489
|
| Image | |
 ChannelsThe number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
1CH
|
 ResolutionVideo resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
FullHD and 2K
|
 Night visionThe quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
 Viewing angleDashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
 Image sensorThe image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
 ProcessorThe chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
 WifiWifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
 GPSA dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
 Parking modeA dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
 Parking mode typesIn parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Trillingsdetectie, Bewegingsdetectie, and Time lapse
|
 CloudA dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
 Loop recordingLoop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
 G-sensorThe G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
 ADASAdvanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
 LCD displayAn LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
 LCD size |
|
 TouchscreenA dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
 Mount typeA dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Zelfklevend
|
 Plug typeThe type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
 CPL filter optionA CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
 Memory typeThe way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
 SD supportWith a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, and 256gb
|
 MicrophoneA microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
 BatteryA dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
 PowerThe voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
 Weight |
407 g
|
 Dimensions |
|
| Contents | |
 In the box |
|
 | |
|---|---|
| General | |
| Brand |
Viofo
|
| Price |
€100,99
|
| Review |
|
| Image | |
| Channels The number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
1CH
|
| Resolution Video resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
FullHD and 2K
|
| Night vision The quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
| Viewing angle Dashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
| Image sensor The image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
| Processor The chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
| Wifi Wifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
| GPS A dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
| Parking mode A dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
| Parking mode types In parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Trillingsdetectie, Bewegingsdetectie, and Time lapse
|
| Cloud A dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
| Loop recording Loop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
| G-sensor The G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
| ADAS Advanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
| LCD display An LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
| LCD size |
|
| Touchscreen A dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
| Mount type A dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Zelfklevend
|
| Plug type The type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
| CPL filter option A CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
| Memory type The way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
| SD support With a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, and 256gb
|
| Microphone A microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
| Battery A dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
| Power The voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
| Weight |
407 g
|
| Dimensions |
|
| Contents | |
| In the box |
|
