○ 4K + FullHD ○ Wifi en GPS ○ IP67 waterproof ○ Remote control Read more
€399,00
○ 4K + FullHD ○ Wifi en GPS ○ IP67 waterproof ○ Remote control
The Vantrue Falcon 1 (F1) is Vantrue's high-end motorbike dashcam. Nothing has been spared on quality and specifications with this dashcam for motorbikes. It films in razor-sharp 4K resolution at the front and FullHD at the rear. Thanks to the Sony Starvis sensor, the image is of the best quality even in the dark. Furthermore, the Falcon 1 is equipped with fast 5.0gHz Wifi so you can easily view images on your phone and has GPS so speed and locations are tracked.
On the front, this Vantrue N5 records in sharp 4K (3840*2160p) footage in 30fps. Due to the WDR (Wide Dynamic Range), the contrast of the recordings is very good and the surroundings are recognisable even in the dark. The front camera is equipped with the high-quality Sony Starvis IMX415 8.0MP sensor that guarantees the best quality at night. The rear camera films at FullHD (1080p) in 30fps.
The Vantrue F1 is equipped with a convenient automatic parking mode. In parking mode, the camera records a 1-minute video when a vibration is detected, for example when someone bumps into the motorbike. The parking mode on the Vantrue F1 can be activated in the App and automatically activates when the engine ignition is turned off.
The Vantrue F1 2CH Dual dashcam is equipped with fast 5.0gHz Wifi. This Wifi can be used to connect to the F1 dashcam via smartphone or tablet. The specially designed Vantrue app for iOS and Android provides seamless access to the dashcam to instantly share all recorded videos with all your acquaintances. Through the Wifi, settings of the dashcam can also be changed and saved recorded footage can be viewed.
The F1 2CH Dual dashcam is equipped with loop recording. This means that the dashcam continues filming when the SD card is full. The oldest fragments on the SD card are then deleted and automatically overwritten for new footage. The length of the fragments can be set to 1,2 3, 5 or 10 minutes. Loop recording can also be turned off, in which case the dashcam makes one long recording. Note that this will stop the camera from recording if the SD card is full.
The Vantrue F1 2CH Dual comes with a handy remote control as standard. You place this remote control on the steering wheel, for example, and connect it to the module with a cable. With one press of the button, you can save a recording securely and take a photo. This ensures that remarkable situations on the road are no longer automatically overwritten by loop recording.
The Motor dashcam is fully IP67 certified, which means that its components can withstand a heavy rain shower. The module and rear camera can therefore be mounted anywhere.
This motor camera features a built-in GPS receiver. The GPS receiver tracks location and speed super fast and continuously. Via the app, you can later also check which route was taken and where the dashcam was filmed.
Vantrue is one of the few dashcam brands with support for SD cards up to 512gb. With 512gb, you can store up to 108 hours (over 4 days) of FullHD videos. With higher resolution, the total recording time will be a bit shorter.
Thanks to the 160˚ wide-angle lens on both cameras, the Vantrue F1 delivers a detailed and wide view of the situation on the road, recording a large area around the bike.
The dashcam automatically starts filming when the engine is started and stops filming when it is turned off. So you don't have to look at it after it is attached.
With its built-in G-sensor, the dashcam notices when you've had an unexpected collision. Upon impact, images are automatically stored securely so they are no longer lost. They can no longer be overwritten or deleted via the dashcam.
The current time and date are always displayed on screen so that it can later be shown at what time the relevant recordings were made.
| General | |
|---|---|
 Brand |
Vantrue
|
 Price |
€399,00
|
 Review |
|
 Warranty |
|
 EAN barcode |
840081900352
|
| Image | |
 ChannelsThe number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
2CH
|
 ResolutionVideo resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
FullHD, 2K, and 4K
|
 Night visionThe quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
 Viewing angleDashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
 Image sensorThe image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
 ProcessorThe chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
 WifiWifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
 GPSA dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
 Parking modeA dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
 Parking mode typesIn parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Trillingsdetectie
|
 CloudA dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
 Loop recordingLoop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
 G-sensorThe G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
 ADASAdvanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
 LCD displayAn LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
 TouchscreenA dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
 Plug typeThe type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
 CPL filter optionA CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
 Memory typeThe way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
 SD supportWith a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
 MicrophoneA microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
 BatteryA dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
 PowerThe voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V
|
 Weight |
1078 g
|
 Dimensions |
|
| Contents | |
 In the box |
|
 | |
|---|---|
| General | |
| Brand |
Vantrue
|
| Price |
€399,00
|
| Review |
|
| Image | |
| Channels The number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
2CH
|
| Resolution Video resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
FullHD, 2K, and 4K
|
| Night vision The quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
| Viewing angle Dashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
| Image sensor The image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
| Processor The chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
| Wifi Wifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
| GPS A dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
| Parking mode A dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
| Parking mode types In parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Trillingsdetectie
|
| Cloud A dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
| Loop recording Loop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
| G-sensor The G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
| ADAS Advanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
| LCD display An LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
| Touchscreen A dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
| Plug type The type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
| CPL filter option A CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
| Memory type The way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
| SD support With a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
| Microphone A microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
| Battery A dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
| Power The voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V
|
| Weight |
1078 g
|
| Dimensions |
|
| Contents | |
| In the box |
|
