This Nanocam NH03 USB-C 3-wire hardwire kit is an intelligent power supply for the Nanocam M27, M93 Pro and other Nanocam dashcams with USB-C port, among others. This permanent power cable connects to your car's fuse box after which the Nanocam's automatic parking mode can be used.
Suitable for: Nanocam M27, M68, T55 and M93 Pro
Not suitable for: Nanocam M19
Variable battery protection
The power supply has a built-in module with a switch that ensures the car's battery does not run down from filming with the dashcam. The switch can be set to 11.8V/23.6V, 12.0V/24.0V, 12.2V/24.4V or 12.4V/24.8V. Power is cut off when the battery voltage falls below the set threshold.
Automatic parking mode
Because this Nanocam power supply is connected to two different power points (one constant and one switched), the dashcam senses when the car ignition is turned on and off. As a result, it automatically goes into parking mode when the car ignition is turned off and starts regular recording again when the car is started.
Installation
View detailed instructions on how to install this hardwire kit on this page.
Four types of Add-a-fuse plugs included
Connecting the power supply is made even easier as 4 types of add-a-fuse plugs are included. This way, only the fuse needs to be replaced for one of these plugs. This is a lot safer than having to plug wires into an existing fuse.
Specifications
Length: 3.5m
Plug: USB-C
Input: 12V/24V
Output: 4.7V 1.5A
Battery protection: 11.8V-12.4V
Type: 3-wire
